Mon-Fri 8am – 5pm EST 800-451-7225 sales@griffiths.com

Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #2

$989.00

Clear
SKU: 911Kuehl507kit2narrowbody Categories: ,

Description

Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #2

Kuehl Porsche 911 AC Compressor Upgrade Kits offer you the widest choice of necessary details to get your air conditioning system up and running. Our Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #2, is suggested where budget is your prime concern. We also offer more comprehensive kits you can read about below, under “You may also like…”.

The Kuehl Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #2,  kit offers many benefits over the original York or Tecumseh compressor found on the early Porsche 911. Our Kuehl 507 Porsche 911 air conditioning compressor uses a “wobble-plate” to move five smaller pistons, as compared to the Porsche 911 York air conditioning compressor that uses a crankshaft to move two large pistons. Our Kuehl 507 Porsche 911 air conditioning compressor’s wobble-plate design requires less horse power to turn and runs smoother than the old Porsche 911 York compressor, and is a better match for the condenser area. Our Kuehl 507 Porsche 911 air conditioning compressor kit uses less engine compartment space making engine maintenance easier (spark plug or oil filter R&R).

With our Kuehl compressor you will notice your Porsche 911 air conditioning system runs smoother and quieter with its new improved efficiency. Our Kuehl 507 Porsche 911 compressor comes with our Kuehl Kwick light weight steel mounting adapter bracket which bolts directly to the original York base. The Kuehl Kwick light weight steel adapter bracket has been CAD designed to reduce weight but not sacrifice strength where it is needed. Compared to cheap cast aluminum brackets offered by knock-off competitors, the Kuehl bracket will save you lots of time during installation and you’ll avoid the knuckle scraping during belt alignment as experienced with cheap kits.

Fits these “narrow body” Applications

  • Porsche 911 non-turbo, 1970 through 1976
  • LH drive models

Replaces OEM Part Numbers

  • 911-126-901-00

Kit # 2 Includes

  • New compressor with clutch, compatible with R134a and R12
  • Ester refrigerant oil, compatible with R134a or R12
  • R134a charge port adapters.
  • Kuehl Kwick mounting bracket & hardware
  • New compressor to rear deck lid condenser barrier hose line assembly with SAE approved crimped fittings and our high-low pressure switch feature. The compressor outlet side fitting will be o-ring and the condenser side fitting of the hose assembly will be flare.
  • New compressor to evaporator barrier line assembly with SAE approved crimped fittings. The compressor inlet side fitting will be o-ring, and the evaporator side fitting of the hose assembly will be flare.
  • New Receiver Drier, Porsche configuration.
  • Detailed installation instructions
  • 1 Year Limited Warranty on Compressor, 3 Year Limited Warranty on Hose Lines

Note – before you order:

This kit is for cars originally having factory type a/c, having:

  • A) a Behr brand evaporator box, where the compressor to evaporator hose is routed from engine compartment, under the RH side belly pan, under the steering rack and up into the smuggler’s box area (evaporator well), and the hose is connected to the evaporator’s outlet pipe which points towards the LH side front fender perse, as opposed to some other brand ac systems where the evaporator’s outlet hose was routed through the RH side front fender well. If you have any doubt of the hose routing please call us or send an email to discuss the hose arrangement before ordering, we can customize any hose you require easily prior to shipment however not so easily after shipment.
  • B) York type compressor base plates supported on the rear engine mount and head, as opposed to some earlier aftermarket compressor base plates that were supported on the cam chain cover studs. The preferred compressor base plate arrangement is supported on the rear engine mount. If you have any doubt of the mount type please call us or send an email to discuss this before ordering. We have new factory type compressor base mounts in stock.
  • C) Verfiy that your condenser and evaporator fittings are “flare” type.
  • D) When you place your order please note in the drop down box the current type of refrigerant oil in your system. We  provide in the shipment either Ester or PAG. Mineral oil was used with original R12 refrigerant. Ester can be used with either R12 or R134a refrigerants. PAG can only be used with R134a refrigerant. If you are unsure as to what refrigerant oil you presently have please contact us and we will assist you.

Additional Information

Weight 29 lbs
Dimensions 15 × 15 × 15 in
Refrigerant Oil Type

,

Reviews

There are no reviews yet.

Be the first to review “Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #2”

Warranty

Griffiths offers a limited warranty for all products.

Briefly, our time period of our limited warranty is as follows:

  • Barrier hoses – 3 years
  • Condensers – 3 years
  • Compressors – 1 year
  • Driers – 3 years
  • Electrical Components – 1 year
  • Expansion Valves – 2 years
  • Fuel Lines – 3 years
  • Oil Lines – 3 years
  • Mechanical Hardware – 1 year
  • Vents – 1 year

For complete details of our Limited Warranties please visit our Warranties page.

Questions?

  • This field is for validation purposes and should be left unchanged.

You may also like…

  • Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #3B

    Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #3B

    $1,248.00
  • Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #3A

    Porsche 911 AC Compressor Upgrade Kit, 1970-1976, #3A

    $1,129.00
Call Now Button