Description

96412612101, 96412612102 Porsche 964-993 AC Compressor

Griffiths’ 96412612101, 96412612102 Porsche 964-993 AC Compressor.  This is a NEW OEM Denso Compressor with Single V-Belt Pulley Clutch.   Drop in replacement, just swap over your old hose manifold.  New manifold gasket and hose o-rings included, as well as refrigerant oil.  R12 and R134a compatible.   No core deposit or core return needed.  Warranty by Denso.

Procedure to replace you compressor:

1. Recover and remove refrigerant from system.
2. Inspect system for debris and contamination, liquid AC flush if debris or contamination is present.
3. Disconnect lines at compressor manifold.
4. Loosen belt tension.
5. Unplug compressor power wire.
6. Remove compressor from mount.
7. Remove manifold from old compressor and swap over to New compressor.
8. Re-install compressor to mount, connect power wire, re-attach drive belt, adjust tension, connect hoses.
9. Replace your receiver drier with new o-rings.
10. Add refrigerant oil to system.
11. Evacuate, charge, test and inspect for system leaks.

Fits

• Porsche 964 C2 & C4 non turbo years 1989-1994
• Porsche 993 years 1994-1998

Includes

• OEM Denso Compressor with Single V-Belt Pulley Clutch
• New manifold gasket
• Hose connection o-rings
• does not include the manifold shown in the picture, you re-use your manifold

OEM Part Numbers

• 96412612101
• 96412612102

NOTE

When you place your order please choose the type of refrigerant oil you wish to use in your system. We can provide you either Ester or PAG and here is how you can determine which is the best option of oil to choose:

• 1) If you plan to continue to use R12 refrigerant, OR, if you are converting from R12 over to R134a, then we suggest you pick Ester oil.
• 2) If you car has already been converted to R134a then the type of oil could be either Ester or PAG.  If the conversion procedure was well documented then there should be a “blue” colored R134a refrigerant sticker somewhere in the engine compartment noting the type of oil, or the service work order or invoice might note the type of oil, or you could contact the service facility whom did the work and ask them, or contact the previous owner.
• 3) Typically the factory refrigerant used from 1993 onward was R134a using PAG refrigerant oil.

We suggest that if the system has Ester or PAG that you continue to use that same type of oil and not mix the two.

If you are unsure as to what refrigerant oil you should choose, please contact us and we will assist you.

96412612101, 96412612102 Porsche 964-993 AC Compressor