91157315202 Porsche LH Drive 911-930 AC Barrier Hose

91157315202 Porsche LH Drive 911-930 AC Barrier Hose

The Griffiths Kuehl brand 91157315202 Porsche LH Drive 911-930 AC Barrier Hose.  Fits LHD 1970-1983  Porsche models 911 and 930.  Compatible with both R12 & R134a refrigerants. This hose connects between the outlet of the receiver drier located in the LH front wheel well and the inlet of the expansion valve.  The hose assembly runs down LH front inner fender wall, under the tub and into the smuggler's box located in the front trunk. The original factory hose tends to get damaged by road debris or age over time. Replacement of the 91157315202 Porsche LH Drive 911-930 AC Barrier Hose requires the following:

1. Recovery of refrigerant from the system prior to removal
2. Removal of LH front tire.
3. Disconnecting the ends at receiver drier and expansion valve.
4. Removal of a few tie wraps and hose clamps.
5. Installing a new receiver drier.
6. Evacuation, charge and testing of the ac system.

Details

• Receiver Drier to Expansion Valve Barrier Hose Assembly
• Stock configuration hose with flare fittings
• Compatible with both R12 & R134a refrigerants
• 3 year limited warranty

Fits

• Porsche 911, 1970-1983, LH drive,  with flare fittings at drier and expansion valve.
• Porsche 930, 1975-1983, LH drive  with flare fittings at drier and expansion valve.

Notes

• This hose configuration is routed down the side of the drier, under the tub and up into the smugglers box to the expansion valve inlet.  If your vehicle's hose is routed differently such as through the inner fender wall instead of under it this hose will be too short.   Please contact us to discuss through the fender hose configurations.
• The original factory hose used copper crush washers at the fitting ends.  Copper crush washers are not needed with Griffiths’ Kuehl brand hoses.
• Please verify that your drier and expansion valve both have flare fittings. If not please contact us for further assistance.